DTF Pressing Instructions

⚡ Same & Next Day Turnaround — Orders placed before 2PM ship same day. Printed in-house in New Hampshire.

DTF Transfer Pressing Instructions

Follow these guidelines to get the best results when pressing your DTF transfers. Proper heat, pressure, and timing are critical for a long-lasting, vibrant print.

⚠️ Always do a test press on a scrap piece of fabric before pressing your final garment. Settings may vary slightly by heat press brand and fabric type.

Recommended Press Settings

Setting Value
Temperature 305–320°F (152–160°C)
Pressure Medium-firm (40–60 PSI)
Press Time 15–17 seconds
Peel Warm or cold peel
Cover Sheet Recommended (parchment or Teflon sheet)

Step-by-Step Instructions

  1. Pre-press your garment for 3–5 seconds to remove moisture and wrinkles.
  2. Position your transfer face-down on the garment where you want it placed.
  3. Place a cover sheet (parchment paper or Teflon sheet) over the transfer.
  4. Press for 15–17 seconds at 305–320°F with medium-firm pressure.
  5. Remove the cover sheet and allow to cool slightly.
  6. Peel the film — warm or cold peel both work. Peel slowly and evenly from one corner.
  7. Optional finishing press: Place the cover sheet back over the design and press for an additional 5 seconds for extra adhesion and a matte finish.

Fabric Compatibility

  • ✅ 100% Cotton
  • ✅ Polyester & poly blends
  • ✅ Cotton/poly blends
  • ✅ Nylon (test first — lower temp may be needed)
  • ✅ Denim
  • ❌ Waterproof or water-resistant fabrics (transfers will not adhere)
  • ❌ Fabrics that cannot withstand 300°F+

Care Instructions (Share with Your Customers)

  • Wait 24 hours before washing after pressing
  • Wash inside out in cold water
  • Tumble dry on low heat or hang dry
  • Do not dry clean or iron directly on the print

Need Help?

Having trouble with your press results? Contact us and we'll help troubleshoot. You can also review our Artwork Requirements to make sure your file was print-ready.